Door Frame Metal Detector

Product Details:

18 Zone Door Frame Metal Detectors

SAFEGATE -18Z High Performance Multi-Zone Walk Through Metal Detecto

Product Descriptions : Safegate Is A High Performance Eighteen Zone Walk through Metal Detector. Each Detection Zone Functions As An Independent Detector And Automatically Increases Discrimination By Reducing The Cumulative Signal Effect Caused By Distributed Harmless Objects. A Full-height Light Bar Displays The Location Of The Detected Metal Masses In Transit. This Results In Rapid Identification Of Threat And A Reduction Of Manual Searches. LED Bar-graph, Indicator Lamps, Sensitivity And Alarm Controls Are Provided In The Console At The Top Of The Door Frame. Only Components Of The Highest Quality And Proven Reliability Are Employed In The Prepare Of Safegate To Ensure A Long, Trouble-free Life. A Mother Board System With Plug-in Cards Is Employed For Minimum Down Time And Ease Of Serviceability.

Specifications :

• Detection Zones:18 Overlapping Detection Zones.
• Sensitivity:200 Sensitivity Levels For Precise Detection Of Target Objects.
• Calibration:automatic Calibration. No Initial Or Periodic Calibration Necessary.
• Indicators:

1. Adjustable Audio Indication
2. Composite Zone Indicator
3. Led Bar Graph Signal Strength Indicator
4. High Bright Led Zone Display On Front & Back Of Side Panels
5. Large LCD Display For Counting And Message Annunciation.

• Interference Rejection: High Immunity To External Electrical Interference, Such As X-ray Machines, Computer Or Cctv Monitor Detections.
• Memory: Parameters Stored In Non-volatile Ram So No Loss Of Settings As A Result Of Power Failure Or Turning Off The Unit.
• Traffic Counter: Microcontroller Based Intelligent LCD Counter To Indicate In, Out And Algebraic Sum Of The Traffic.
• Power Source: SMPS 90-270v Ac & 12v/7ah Battery Seamless Battery Changeover In Case Of Mains Failure Batteries Are Internally & Automatically Charged During Operation.
• Battery Backup: Integral 12v 7ah Chargeable Battery With Built-in Charger To Cope With Power Failures Of Over 12 Hours.
• Construction: Rugged Structure Made Of Detachable Laminated Side Panels For Ease To Install & Transportation.
• Weight: 70 Kgs (approx)

Additional Information:

• Item Code: 18-Zone

Product Details:

Walk Through Metal Detector (Single Zone- SAFEGATE-III)

Product Description :SAFEGATE-III is a reliable single piece walk-through metal detector system that does not require a separate control unit. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe.

It is also equipped with an intelligent 5 digit back-lit LCD counter to indicate the in, out and algebraic sum of the traffic going through the door frame.

It has been designed for fast installation and operation under all environments. Long life LED Walk/Stop indicators are incorporated on top of the doorframe to regulate the flow of traffic.

All controls and audio/ visual alarms such as Piezo transducer, LED bar graph, indicator lamps and sensitivity controls are provided at the rear top of the door.

- Automatic zero adjustment
- Quick installation – no training required
- Ignores external metals
- 10 levels of sensitivity
- 10 step bar-graph indicator
- Intelligent counter for traffic entry, exit and algebraic sum
- Piezoelectric beeper for indication of metal
- Walk and Stop indicators to regulate traffic
- Detects all metals, alloys and ferrites
- Low field strength - no effect on pacemakers & magnetic media
- SMPS power supply for use with 90V to 270V
- Built in full-function battery backup for over 12 hours

Additional Information:

• Item Code: SingleIII-Zone

Product Details:

Dual Zone Door Frame Metal Detector

Product Description :Door Frame Metal Detector is a reliable single piece walk-through metal detector system that does not require a separate control unit. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe. Special ferrite detection circuitry has been employed to detect weapons concealed in ferrite containers. It is also equipped with an intelligent 5 digit back-lit LCD counter to indicate the in, out and algebraic sum of the traffic going through the door frame.It has been designed for fast installation and operation under all environments. Long life LED Walk/Stop indicators are incorporated on top of the doorframe to regulate the flow of traffic. All controls and audio/ visual alarms such as Piezo transducer, LED bar graph, indicator lamps and sensitivity controls are provided at the rear.

Quick installation – no training required
Automatic zero adjustment
Ignores external metals
9 levels of sensitivity and 2 levels of alarm
10 step bar-graph indicator
3 level LED indicator for low,
medium and high Levels of alarm
Piezoelectric beeper for indication of metal

Specifications :
Power Source: 90-270V AC and 12V/7AH Battery Seamless battery changeover in case of mains failure Batteries are internally and automatically charged during operation
Power Consumption:Less than 40 Watts
Operating Principal:Delta-Q Auto calibration
Operating Frequency:20 kHz (nominal) Sine Wave
Indicators:a) GREEN LED "WALK" Indicator
b) RED LED "STOP" Indicator
c) 10 STEP LED BAR level Indicator
d) LOW/MEDIUM/HIGH LED Indicator lights
e) BLUE LED to indicate battery operation
f) 5 Digit back-lit Intelligent LCD Counter
Intelligent Traffic Counter:Microcontroller based 5 digit backlit intelligent LCD counter to indicate in, out and algebraic sum of the traffic Sensors:Infrared sensors are incorporated to prevent metal outside the door frame from interfering with the system and also for the purpose algebraic counting of the traffic going through the door frame.

Sensitivity:
10-Step adjustable sensitivity from Low to detect objects like grenades, Guns and Swords to High to detect objects like watches, keys etc.

Alarm:Loud piezoelectric alarm with two-step volume control.

Controls:i) ON/OFF Switch
ii) VOLUME HIGH/LOW Switch
iii) 10 Position SENSITIVITY Switch

Overall Dimensions: 7 ft x 2 ft 9" x 1 ft

Additional Information:

• Item Code: Double-Zone
• Port of Dispatch: New Delhi
• Production Capacity: 50
• Delivery Time: 5 days

Product Details:

High Performance Multi-Zone Walk-Through Metal Detector

Product Details :SAFEGATE-27Z is a high performance 27 zone walk through metal detector. Each detection zone functions as an independent detector and automatically increases discrimination by reducing the cumulative signal effect caused by distributed harmless objects.

A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threat and a reduction of manual searches.

LED bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame.

Components of the highest quality and proven reliability are employed in the manufacture of SAFEGATE to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum down time and ease of serviceability.

- Microcontroller based design
- High performance multi-zone detection
- 27 detection zones for accurate pinpointing of metal
- PC connectivity for remote programming and monitoring
- Very high sensitivity suitable for anti-theft application
- Quick installation – minimal training required
- Auto calibration - Does not require zero adjustment
- Detects all metals, alloys and ferrites
- 250 levels of zone wise sensitivity adjustment
- LED bar graph signal strength indicator
- LED based composite zone display
- Access to programming protected by password
- Intelligent people counter for entry, exit and algebraic sum
- SMPS power supply for use with 90V to 270V
- Built in full-function battery backup for over 12 hours
- Easy to mount and assemble
- Wireless remote control

Additional Information:

• Item Code: 27-Zone

Product Details:

Product Details:

Walk Through Metal Detector- SAFEGATE-I

SAFEGATE ONE is low cost single-zone walkthrough metal detector. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe. It is also equipped with an intelligent LCD counter to indicate the IN, OUT and algebraic sum of the traffic passing through the door frame.

Bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. Only components of the highest quality and proven reliability are employed in the manufacture of SAFEGATE to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum downtime and ease of serviceability.

Features:

·         Low cost single zone detector.

·         Quick installation – no training required.

·         Automatic zero adjustment.

·         LED based Bar-graph indicator.

·         Intelligent people counter for entry, exit and algebraic sum.

·         Walk and Stop indicators to regulate traffic.

·         Detects all metals, alloys and ferrites.

·         SMPS power supply for use with 90V to 270V.

·         Built in full-function battery backup for over 12 hours.

Additional Information:

• Item Code: Single1-Zone

Product Details:

Walk Through Metal Detector- SAFEGATE-I

SAFEGATE ONE is low cost single-zone walkthrough metal detector. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe. It is also equipped with an intelligent LCD counter to indicate the IN, OUT and algebraic sum of the traffic passing through the door frame.

Bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. Only components of the highest quality and proven reliability are employed in the manufacture of SAFEGATE to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum downtime and ease of serviceability.

Features:
• Low cost single zone detector.
• Quick installation – no training required.
• Automatic zero adjustment.
• LED based Bar-graph indicator.
• Intelligent people counter for entry, exit and algebraic sum.
• Walk and Stop indicators to regulate traffic.
• Detects all metals, alloys and ferrites.
• SMPS power supply for use with 90V to 270V.
• Built in full-function battery backup for over 12 hours.

Product Details:

6 Zone Door Frame Metal Detector

Product Description : Our Higher End model of Walk Through Metal Detector / Door Frame Metal Detector, which comes complete with a weather resistant cover that allows the unit to be used in open areas exposed to the weather.

Useful where there is no area available indoors to set up a security cordon or where open air events take place.

Some of our Special Features:

UltraMind Technologies Stocks, sales and supports different models of Walk Through Metal Detectors/Door Frame Metal Detectors. WTMD- (Multi zone 6 Zone) is recommended for Hotels, Government Buildings, Schools, Laboratories and Multi National Corporations.

Some of our Special Features: (Model: PBR-6000 Six Zone)
Specification:

1. Walk Stopper Indicator

2. Security Protection : password Protected only the authorized Person can change the settings etc.

3. Safety : safe heart pacemaker, pregnant women, the Floppy disk, file & video tape.

4. Water resistant

5. LED indication on both front and back panel.

6. Easy installation and dismantling

7. Detection area : according to the basic structure of human body,The detector divided Six overlapping region.

8. Detector : 6 real Zone detector.

9. Display : both audio Alarms and visual LED indication panels.

10. Sensitivity : each zone sensitivity is equal and settable as per need.

11. Appearance : rich aesthetic appearance to match the decorum of the surrounding area, optional colour available at extra costs.

12. Easy operate

Technical Specification :

• Electric current : AC 220V/50hz
• Power :< 35W
• Outer frame : 2200MM(H) X 800MM(W) x500MM(D)
• Inner frame : 2010MM(H) X 700MM(W) x500MM(D)
• Weight : 60 Kg
• Work Environment : -20^oC- +55^oC degree

Product Details:

9 Zone Door Frame Metal Detector

Product Description: SAFEGATE is a high performance 9 zone walkthrough metal detector. Each detection zone functions as an independent detector and automatically increases discrimination by reducing the cumulative signal effect caused by distributed harmless objects.

A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threat and a reduction of manual searches.

LED bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame.

Only components of the highest quality and proven reliability are employed in the manufacture of SAFEGATE to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum down time and ease of serviceability.

- Microcontroller based design
- Low cost multi-zone detection
- 9 detection zones for accurate pinpointing of metal
- Quick installation – minimal training required
- Auto calibration - Does not require zero adjustment
- Detects all metals, alloys and ferrites
- 200 levels of zone wise sensitivity adjustment
- LED bar graph signal strength indicator
- LED based composite zone display
- Access to programming protected by password
- Intelligent people counter for entry, exit and algebraic sum
- SMPS power supply for use with 90V to 270V
- Built in full-function battery backup for over 12 hours
- Easy to mount and assemble
- Wireless remote control (Optional)

Additional Information:

• Item Code: 9-Zone

Product Details:

Multi zone Door Frame Metal Detectors-16Zone

• Pin Point metal Detector Gate
• High Performance walk through Metal Detectors

SAFEGATE is a high performance Sixteen zone walkthrough metal detector. Each detection zone functions as an independent detector and automatically increases discrimination by reducing the cumulative signal effect caused by distributed harmless objects.

A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threat and a reduction of manual searches.

LED bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame.

Only components of the highest quality and proven reliability are employed in the manufacture of SAFEGATE to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum down time and ease of serviceability.

• 16 zone detection for precise target location
• Reliable microprocessor based design
• Built-in battery backup of over 12hours
• Intelligent traffic counter
• Access to programming protected by password
•  Low field strength - no affect on pacemakers and magnetic media

 SENSITIVITY:250 sensitivity levels for each zone for precision detection of target objects.

CALIBRATION: Automatic calibration. No initial or periodic calibration necessary.

POWER SOURCE: SMPS 90-270V AC & 12V/7AH Battery Seamless battery changeover in case of mains failure Batteries are internally & automatically charged during operation

TRAFFIC COUNTER: Microcontroller based intelligent LCD counter to indicate in, out and algebraic sum of the traffic. It also keep a track on number of Alarms and Alarm percentage.

DETECTION ZONES:16 overlapping detector zones.

BATTERY BACKUP:Integral rechargeable Battery with built-in charger to cope with power failures of over 12 hours.

INTERFERENCE REJECTION: High immunity to external electrical interference, such as x-ray machines, Computer or CCTV monitors detected.

TEMPERATURE: -10Deg C to +55Deg C & humidity of 95% non-condensing.

CONSTRUCTION:Rugged structure made with detachable side panels for ease to install & transportation.

WEIGHT:70Kgs (Approx)

 

PC CONNECTIVITY (Optional):Ethernet based PC connectivity for

 

remote programming & monitoring.

PASSWORD PROTECTION: Password protection to prevent tampering of settings.

MEMORY:Parameters stored in non-volatile RAM so no loss of settings as a result of power failure or turning off the unit.

OPERATING PRINCIPLE: Pulse CW.

 

 

 

Additional Information:

• Delivery Time: 4-5 days by DTDC Courier & TRansport, Delivery Charges@extra